Installing a new tiled floor on top of an existing tiled floor is something that homeowners can handle on their own. Plan ahead and place a focus on the preparatory work for professional results when installing ceramic tiles. Installing ceramic tiles can be tricky. Successful tile work is a direct result of good planning and methodical approach. Take the time to do the correct preparatory work before you begin. Cover the old floor
Whether you replace an old shabby floor or install a new one, you can't beat ceramic or stone tiles for durability and appearance. When laid correctly, it is almost forever a floor that requires almost no care and maintenance. And you can choose materials from a variety of colors and textures. Measuring floors
Measure your floor carefully and calculate the number of square feet needed.
For square or rectangular rooms, increase the length of the room by width, rounding all sizes to the nearest foot.
Divide the oddly shaped space into squares or rectangles. Count the square records for each section and add both. Buying ceramic materials:If this is your first tile project, keep the layout and pattern simple.Large tiles work well in large areas but can dominate smaller rooms.Consider tiles with a rough or textured finish, as glossy surfaces can be slippery when wet.Buy 10% – 15% more tiles than needed to account for future damage, errors and replacements.Where is this tile placed?
Deciding exactly where the tiles will be placed will help you narrow down the size and material. Are you using this tile for backsplash? A counter? Floor? Wall? Most commonly, stone, ceramics and porcelain are used for counters and flooring. Glass is widely used for walls and backsplash. The bath has a mosaic tiled floor (which provides a firm grip in a slippery bathroom), accented with rectangular glass tiles that are easy to clean.
Ceramic tiles are perfect in bathrooms or other moisture-rich environments. It's easy to clean and install, waterproof, sturdy, and is a great value for the price. Designers also love ceramics because their surface is ideal for paint ornaments or decals. Consider the shape and size.
This is especially important if you plan to install the tiles themselves. Larger tiles have a distinctive look and are easier to install and lay than smaller tiles. If you use ceramics, check that all the edges are straight; This will make grouting easier. Also make sure that all your tiles are the same size – the manufacturing process can result in variations of up to 1/4 inch. Prepare the surface:
Make sure your surface is clean, smooth, and dry for best results. Take the time to repair, patch, and level the damaged or uneven areas. Double-check to make sure the surface is structurally structured and the area is free of wax, soap, and oil.
Remove any mold, trim, or equipment that might interfere with the tile application, and check the doorjamb to make sure the tile has permission when installed underneath. Identifying these potential complications in advance will help your installation run smoothly.
To make the larger room easier to organize, divide each section into a smaller 2' x 3' grid by clamping an additional line parallel to the center line
Consider how tiles can be laid as well as possible to maximize aesthetic appeal and minimize cutting. Tiles can be centered on the floor, or full tiles can be used along the most visible walls. When arranging the floor:
Mixing thin adhesivesCheck the box: Measure the length of each wall, and the diagonal from corner to corner. The room is square if the opposite walls are the same length and the diagonals are suitable.Set Guidelines: The pop lime line on the floor parallel to the wall to act as a guide for laying tiles.2、Laying tiles
Mix the thin dough in a 5-gallon bucket using paddle mixing thrown into the drill at low speed. Follow the instructions, be sure to use the correct ratio of water for the mortar mixture.
Make a dough like mortar mixture for 15-20 minutes. Keep a bucket of clean water and a sponge useful for wiping off excess before installing and cleaning the appliance.
Use a stained shovel to spread the mortar evenly over a small area where you will begin laying tiles. Position the tiles on the mortar along the guidelines and press into place.
Once the full tiles are laid and safe to pass, the next step is to cut and load the tiles along the border along the wall.
To do this, measure the distance to the wall, minus the width of the grout line, and mark each tile.
The score cutter can be used to create straight cuts that run across the length of the tile.
Another option for cutting tiles is a wet saw equipped with a diamond-tipped knife, which can make both through and a partial straight cut.
These two types of tile cutting tools can be rented at rental equipment outlets. Be sure to wear eye and ear protection when working with power tools.
Tile nippers can be used to create curved pieces by breaking up a small number at once. You can also do some parallel cutting with a wet saw, then break down the excess and perfect the cut with a stalk.
A handheld grinder with a diamond knife can also make curved cuts. Using a dry grinder on the tiles produces a lot of dust, so work outside or in a well-ventilated area and put on a mask or respirator. A small handheld saw also works well and does not produce dust.
Once the border tiles are cut to size, use a thin set to subfloor. A small doubled notched shovel is very useful when working in a tight place.
Now that you've found the surface, create the layout, attach the adhesive, and cut the tiles, you're right-
And of course, it will take at least 20 minutes to admire the time and care you have put on your new floor!
Now that your Mohawk Ceramic Tiles are installed and it's been 24 hours to set them up, your final step is to "grout" or fill the joints and consolidate your floor into one mass.
After carefully reading and following all instructions and precautions on the grout package, just use it in just 30 minutes. When you remove the tile-releasing spacer and spread it onto the surface of the tile, use a rubber float or a tethering device to force it into the joint.
Tilt the float at an angle of 45 degrees and with the edge of the float, remove the excess grout from the surface immediately. Now tilt the float at an angle of 90 degrees and rub diagonally over the tile.
Once you've left the grout set a little for about 15 to 20 minutes, use a damp sponge to remove residue from the surface and smooth the grout joints.
0 comments:
Post a Comment