minimalist house door model with glass door
Door. A material from the building of a house that is familiar in our daily life. Not only as a room sweetener, room covering, the door turns out to have several other functions.
When it functions as a fire blocker on an emergency exit, the door is made strongly with a material that is resistant to fire.
Meanwhile, if the door is used to bring the exterior into the interior, the door is made with transparent material without neglecting its function as a space divider.
This article is presented by PT AMP jakarta house contractor in Matraman, Jakarta.
Keep up with the article from jakarta house contractor, until at the end of this writing you can find out some of the functions and benefits of doors, door model models and also the price of wooden doors to the price of iron doors on the market.1. Definition of door
A door is a home room divider that is usually equipped with hinges or other auxiliary materials to help the mechanism be opened and closed by being pulled, pushed or shifted. Most doors are equipped with a locking mechanism, both one-way and two-way.
The door leaf is mounted on a wall opening, a fence plane or a panel plane, just like a door leaf on a car.
The movement of the open and close of the door leaf can be possible through several directions. The door can be opened by pushing pull one of its sides, shifted in a horizontal direction parallel to the wall, folded parallel to the wall until it rotates to form a rotating motion.
In general, the inner side of the door resembles the outer side, but some functions of the door can be different.wooden door as the door of the house eskterior2. Benefits of Doors
As a material for sealing walls, fences or panels, the door has several functions:
The main function of the door is that the door has the benefit of providing a sense of security to the occupants of the room by limiting one's access to be able to go in and out through it.
We can also use the door to control the view from the outside of the room to the indoors.
In large meeting rooms it is common to find folding doors, which are used to divide the function of the room into several smaller rooms.
Doors can also have benefits as a regulator of air and sunlight access to be able to pass through or limit their access to the room. In Dutch buildings in Indonesia, some doors are equipped with crepes or lattice grids. This crepe is an air ventilation duct that maintains air-free access even though the door is closed.
The outdoor noise level can be adjusted with the door open and close access.
While in the function of emergency doors, doors can provide benefits of limiting the spread of fire during fires. This is why in general emergency exits are made using iron materials that are resistant to fire.
Doors also have meanings that can radiate aesthetics, certain symbols of symbols to the social status of a person in their society.3. Door Design
From the function of the door above, we know a lot of types of doors that are made for certain functions.
In general, the door design that we know is a panel that covers the wall hole. This model door has many variations that have their own functions. Home door model dutch door / half door3.1. Half-door design
The design of the door with half a door is an adaptation of the design of the stable door. The door of this model has 2 door leaves that divide the door into top and bottom. The upper door is used by the stable workers to be able to provide food to the horse while keeping the horse from coming out of the stable. French house door model3.2. French doors
The french door leaf design consists of a large frame of the door holding a panel of glass panels mounted with symmetrically mounted shape and size following the desired pattern.
Doors of this model can be installed single or double door leaf. In the installation of double door leaves, the material of the middle frame is dispensed with. This makes the doors of the French model open wider because it opens up a larger field.
We can find french model doors on the access to the balcony of the house, terrace or access to the backyard of the house.3.3. Disguised Door
The shape of the disguised door is made to resemble the surrounding wall and without being equipped with a door handle. With the same shape, the same color and an opening that is not clearly visible, disguised doors are usually used to trick the function of the door on the wall.3.4. Bar Door
The design of the bar door is one of the icons and attractions of the American cowboy culture. The door leaf of the bar model only covers part of the opening of the room, usually only limited to the knees to the chest of an adult. The door hinges use a model that can function 2-way open and close.3.5. Engineering Doors
An engineering door model or flush door is a door made by joining the door skin which is usually made of plywood or MDF sheet material, which is then incorporated on a wooden frame as a source of strength for the door structure. On the engineering door, there is a part of the empty space between the sheets of door skin. This free space can be filled to improve its ability to muffle sounds from within the room.4. Some Mechanics On Doors4.1. Hinge
Hinges are the most common mechanics that are usually found on doors. The mechanic with hinges makes it easy for the door to be able to open the lid by pushing or pulling in one direction of the opening, and cannot be directed otherwise.
Hinges are generally installed on the vertical side of the door except for some special doors such as garage doors abroad that are installed on the horizontal side.
The hinge system is the most popular mechanical system because of its simple working principle, it is cheaply mechanical, easy to install, easy to replace, easy to maintain and widely available in the market.4.2. Sliding Rails
If you need a door that seems to be able to open perfectly to all parts of the door, then a sliding system door can be an alternative.
With the right architectural design, the sliding door design can be made as if it will be hidden between the wall panels. This will create a maximum opening in the door hole in the wall of the house.
A sliding rail mechanism is installed on the open and close door with a sliding unscrew system. Sliding mechanical systems are divided into two types of mechanics, rails attached to the wall or floor in the direction of the door and wheels attached to the door.
Doors with relative sliding models have more complicated mechanical properties of hinge systems. Sliding door maintenance to open and close, depends entirely on the driving wheels attached to the door leaf. This wheel requires lubrication to ensure the smooth running of the wheels moving.minimalist door model rotate4.3. Turnstiles
Unlike the previous mechanism, the turnstile mechanism is very rare in Indonesia.
The turnstile mechanism uses a kind of bearing as a holding medium for static mechanisms on the floor and frames with dynamic mechanisms on the door leaves.
Due to the nature of opening the lid by using the center or edge of the door as a rotational shaft, the plane of the door leaf cannot be perfectly hidden when the door is open.5. Door Material
The naming of doors in Indonesia is often associated with the material of the door being formed. Door materials that are commonly found in the market are usually wooden doors, iron doors, pvc plastic doors, aluminum doors to glass doors.5.1. Wooden Doors
Wood material was chosen as a medium for making doors since hundreds of years ago.
Wood remains the choice of door making due to the aesthetic and quality factors of the wood itself. In addition, the advantage of choosing wood materials is also because wood materials are easy to form and can be given a touch of detail such as carvings or special panel panels on the door surface. Wooden doors of the house
All of this makes the appearance of wooden doors remain the choice of most doors.5.2. Iron Door
Iron material is also an option in the manufacture of doors. Iron is known as a material that is rigid, strong and does not change with time. If the strength factor is the determining factor for the selection of the door, then the iron door can be the right choice.
To provide a better soundproofing factor, in the production of iron doors added polyurethane material or other foam material.
Iron doors are usually sold in the same package as the door frame. This is a separate consideration when compared to wooden doors.5.3. UPVC Doors
Doors made from UPVC material began to be known in Indonesia since the early 2000s.
Initially, it was only made by foreign companies until now it has been made by several local Indonesian companies.
0 comments:
Post a Comment